Application OperatingTemp. Conditions
Internal and External
Coating of tubing
150°F
(66°C)
depending on service
environment
Sucker Rods 150°F
(66°C)
depending on service
environment
Drilling Riser Pipe(Choke
& Kill Line and Mud Boost
Line)
250°F
(121°C)
while circulating
Blast Joints 150°F
(66°C)
not applicable
Drill Pipe 450°F
(232°C)
while circulating
CeRam-Kote 54® TZS is a thin-film, spray
applied ceramic epoxy coating engineered
primarily to provide external abrasion resistance
and corrosion protection. CeRam-Kote 54® TZS
is a highly modified epoxy resin system that has
been heavily loaded with a unique package of
ceramic particles enhancing its ability to perform
well in a variety of abrasive environments.
Acidizing Fluids
If well fluids are not hot and stimulation fluids
are charged through the coated tubing in a short
period of time, there is generally little effect if
the fluids are flushed completely through the
tubulars.
However, some organic acids and solvents may
have a detrimental effect on certain organic
coating systems, especially as temperatures
increase. If stimulation fluids are left in the
tubing, they can reach formation temperature and
cause accelerated attack on the coating. A
Freecom Technical Representative should be
consulted when acidizing is contemplated.