FREECOM, INC. • P.O. BOX 2119 • BIG SPRING, TEXAS 79721 • 432-263-8497 • 800-346-4299 • 432-263-5269 FAX
www.CeRam-kote.com • E-mail address: freecom@CeRam-kote.com
PRODUCT DATA SHEET: CERAM-KOTE THINNER 5
Description: Solvent thinner
Recommended Use: CeRam-Kote Thinner 5 is a recommended thinner for all CeRam-Kote epoxies and urethanes,
especially when the ambient temperature is over 90°F / 32.2° C. Please read each product’s
instructions carefully prior to thinning any CeRam-Kote product.
TECHNICAL DATA
Flash Point: 90°F / 32°C (TCC)
Storage: Do not store above 120°F / 49°C. Store large amounts in structures made for OSHA Class 1B
liquids. Keep container tightly closed and upright when not in use to prevent leakage.
Health and Safety: Please observe the precautionary notices displayed on the container. Spray under well
ventilated conditions. Do not breathe or inhale mist. Avoid skin contact. Spillage on the skin
should immediately be removed with suitable cleanser, soap and water. Eyes should be well
flushed with water and medical attention sought immediately.
For detailed information on the health and safety hazards and precautions for use of this
product, please refer to the Material Safety Data Sheet.
9/18/03
DISCLAIMER: The information in this data sheet is given to the best of our knowledge based on laboratory testing and practical experience.
However, as the product is often used under conditions beyond our control, we can not guarantee anything but the quality of the product itself. We reserve
the right to change the given data without notice.